Project Sub-Ohm “Pocket” Box Mod $80.99

Pocket Box Mod

“Pocket” 60W Box Mod

Project Sub-Ohm, the people that have been bringing you new and improved rebuildable atomizers and tanks for a long time, has now come out with a brand new box mod that is sure to make any vaper out there jump for joy. The “Pocket” 60W temperature control box mod is now available through VaporDNA for just $80.99.

The Project Sub-Ohm “Pocket” 60W box mod is stylish, ergonomic device that runs from 200 to 600°F and from 5 to 60 watts. It is an intricately designed single 18650 device that will definitely be turning heads for a long time to come.

If you are in need of a new temperature control box mod, then you should definitely check out the “Pocket.” At only $80.99, it is a steal, especially seeing that it only came out today (July 13, 2015).

The most intriguing aspect of the “Pocket” box mod from Project Sub-Ohm is its design. It is a rather small box that easily fits in your pocket (I see what they did there), and it sports an absolutely amazing aesthetic.

Combining both functionality and visual appeal, the “Pocket” 60 watt box mod is a vaping powerhouse that will make any vaper, new and old, ecstatic. Do not miss your opportunity to pick this bad boy up.

VaporDNA is allowing you to place orders for the “Pocket” box mod right now. With the coupon code, VC10, you are able to pick it up for just $80.99. The site states that the product is out of stock, but it should be back in stock by midnight tonight PST. Place your orders now so that you can get this fantastic new box mod. And as always, vape on.

Coupon code: VC10

Get This Deal!

Features

  • Temperature Control Module
    • 200 to 600 Degrees Fahrenheit
    • 0.1 to 1.0 Ohm
  • 5 to60W
    • 0.1 to 3.0 Ohm
  • Full Color LCD Screen
    • Speedometer Styled Power Display
    • Puff Counter
    • Resistance Readout
    • Date and Time
    • Battery Life Indicator
    • Adjustable Screen Timeout, Stealth,
  • Uses Single 18650IMR battery
    • Redesigned Clean Interior
    • Tab and Dual Magnet Door
  • USB Charging Port
  • Manufactured out of Zinc Alloy with a Gunmetal Finish
  • SS 510 Fittings with Spring-Loaded Positive Pin

<p>I am a vape enthusiast that lives in Charlotte, NC. I have been vaping for about three years now, and I have been working in the industry for a little over a year. I started working in the industry in order to help people get off the stinky’s, and what better way to do that than by bringing vapers the best deals possible?</p>

NO COMMENTS

POST A COMMENT

Get Fast access to the latest deals

x
x