Ivogo N22 RDA Clone $6.76
The authentic N22 RDA is made by One Vapors in the Phillippines and sells for $110 to $140 dollars. The N22 is made from 304 stainless steel with three large square posts that have huge wire terminal holes, 2.5mm positive post & 2mm negative posts. The adjustable airflow system takes air in through large cyclops style holes and directs the air through four 1.5mm air-holes located directly under the coil on each side. Twisting the top cap can open and close the outside air-holes to give you just the right amount of airflow.
The Ivogo N22 clone is a 1:1 copy of the authentic with the “N22” logo engraved into the top cap. It has the same square posts with huge wire holes and the same adjustable airflow system. The base, top cap, and posts are all made from stainless steel but the 510 center pin is copper for improved conductivity. It comes with a screwdriver, wick, wire, o-rings and screws.
N22 Clone Features:
- Made from Stainless steel
- Compatible with 510 drip tip
- Air flow control (2 air holes located on the base of the atomizer, 4 under each coil)
- Triple posts for single/dual coil build
- Copper 510 center pin
- Posts material: Stainless steel
- Measures 22mm by 33mm