New MVP 20W by Innokin
MVP 20 Watt Box Mod
[dropcap]F[/dropcap]ans of the iTaste MVP 2.0 have been waiting patiently for Innokin to release the next generation MVP, and it looks like today is the day.
Earlier today Innokin announced that they would begin taking wholesale orders for 3rd generation MVP called the iTaste MVP 20W.
The new Innokin iTaste MVP 20W, as you may have guessed, has had it’s output power boosted up to 20 watts with a new and improved chip-set. That’s a 9 watt increase over the 2.0 device which had a 11 watt maximum output. It’s both variable wattage and voltage so you can adjust the power out from 6.0 to 20.0 watts (in 0.5 watt increments) or adjust the voltage from 3.3 to 7.5 volts (in 0.1 volt increments).
The power system has also been improved with a new 32-bit ARM microprocessor which has faster data processing power and will provide users with a better vaping experience. The device has also been fitted with a steady VDC power output that has a 1% accuracy, this will increase battery life and improve reliability.
I can’t find the exact measurements of the MVP 20w but Innokin says it has a “sleeker look”. They did decrease the size by removing the protruding eGo connection that the MVP 2.0 had, instead the MVP 20w has a nice flush 510 connection with spring-loaded pin and they will now package a 510 to eGo adapter with the device.
The internal battery on the MVP 20w has the same capacity as the 2.0, 2600mah and like the 2.0 you can still use the battery to charge other electronics with the USB output. It also has the same LCD screen with two adjustment buttons and can display things like output power, atomizer resistance, and puffs taken.
iTaste MVP 20w Features:
- Improved 32-bit ARM microprocessor
- Steady VDC power output (1% accuracy)
- Large 2600mah battery
- Charge other electronic devices with it’s USB output
- Flush 510 Connection with spring-loaded 510 center pin
- Comes with an eGo thread adapter
- Variable Voltage from 3.3 – 7.5 volts in 0.1 volt increments
- Variable Wattage from 6.0 – 20.0 watts in 0.5 watt increments
- LED Screen displays Output Power, Atomizer resistance, and puff counter