Guide to Squonking | Vaping Cheap

Guide to Squonking

Guide to Squonking

Squonking is not new to the vape world, and if you’re a beginner you might be confused or overwhelmed by the amount of choices you have when choosing a vape. Even if you’re an advanced user, this term may still be quite new since it wasn’t that popular.

Now squonking is becoming more and more mainstream, and we’re seeing a lot of manufacturers entering this niche market. Many vapers are mostly familiar with RDAs (rebuildable dripping atomizers), but the one downfall to using this type of atomizer is that you consistently have to drip e-liquid in order to continue vaping. With squonking, it pretty much eliminates this process, giving you the performance of an RDA without the hassle of continuously dripping.

In the Vaping Cheap Guide to Squonking we’ll cover some basics when it comes to this type of vape experience and even recommend some options for the vaper interested in this type of vaping style. Before getting any further into this guide, we’d like to thank our sponsors: GearBest, Direct Vapor and CVapor.

The Basics

What is a Squonk Mod?

We often get the question, what is a squonk mod? Well, a squonk box mod is relatively similar to other vape mods you see on the market, but inside of a squonk mod there is a bottle which feeds e-liquid up into the attached RDA atomizer. This is the one key difference you’ll see between a squonk mod and a traditional box mod.

Using a squonk mod is incredibly easy and everything is confined within the device itself which adds to the simplicity. No more are the days of carrying a bottle of e-juice with you when you have one right inside of your squonk vape mod. Squonk mods are also called bottomfeeder mods.

Since squonk mods do have to have space inside of them to house an e-juice bottle, many vaping companies tend to manufacture unregulated or mechanical squonk mods in order to keep the size smaller. Remember, for a regulated box mod there is a chip or board which also takes up room, so regulated squonk mods are typically larger than most traditional box mods. As with any mechanical or unregulated device, be sure to understand ohms law and battery safety!


How to use a Squonk mod

Now that you have a bit more understanding of what exactly is a squonker, using one is quite simple. As mentioned previously, a squonk device does house a bottle of vape juice within. In addition to this there is a small space usually on the back or side of the mod which allows you to push or squeeze the bottle. Once you do this e-juice will travel into your atomizer from the 510 connection and saturate your wick and coils. Whatever e-liquid is not needed is sucked back into the bottle once you finish squeezing or pressing the squonk bottle.

Squonk bottles typically contain between 5ml and 7ml of e-juice, which is plenty and should last you quite some time before needing to refill. Also, the squonk bottle is usually located right next to the battery.


What atomizers can be used for squonking?

Not every type of atomizer on the vaping market can be used for this type of vaping style. The type of atomizer you’re looking for to squonk with will have a squonk or BF 510 pin. The reason why you need this specific 510 connection is, because a squonking pin has a hole in the middle which will allow e-liquid to pass through when you go to squonk. Normal 510 pins do not have this feature, so it’s important when choosing an atomizer for squonking that you know for sure this is included.

Some RDAs are designed for squonking and come with it pre-installed while some others have them as an additional accessory that’s included or a separate purchase. Many of these are often called bottomfeed atomizers. We’ll be covering some of this later in this guide.


Why Squonk?

There are many reasons as to why a vaper would want to get into squonking. As mentioned previously, convenience is a major reason for a vaper to consider squonking. You won’t be refilling your tank or constantly dripping anymore when you start squonking, which is perfect for the vaper who wants to vape on an RDA, but hates the constant refilling. Just to give a comparison, most RTAs or sub ohm tanks have a capacity of 3ml to 5ml and most squonk bottles hold between 6ml and 7ml of e-juice, sometimes even up to 10ml.

Also, to come back to the vaper who dislikes having to drip so often while vaping on an RDA, squonking while you’re on the road is much easier in comparison to dripping yourself. Another factor to consider is that with squonking, majority of the time your vaping on an RDA, which means you’ll be getting RDA level flavor, while when vaping on a vape tank or RTA, you won’t be getting as great of flavor. Lastly, with squonking you won’t be experiencing much leaking since when you squonk, the excess vape juice gets sucked right back into the bottle.


Cons to Squonking

Even though there are tons of reasons why you would want to start squonking, there are some cons to it, just like anything else in the vaping world, nothing is perfect. The first con to be mentioned is that there isn’t much options currently on the market, and a lot of the options are unregulated squonk mods, which some vapers may not prefer. With squonking becoming more mainstream, we’ll start to see more squonk mods hit the market, but as to right now, there’s not that many options.

This leads to the second con, which is battery life. As mentioned earlier, most squonk mods utilize a single 18650 battery, which means you won’t be getting the best battery life. This of course will be determined by the wattage your vaping at, but generally speaking the battery life of a single battery mod isn’t the greatest.

Just be sure to carry an extra 18650 battery with you if you’re going to be vaping a lot or at higher wattages. The last con is that you can still face some leaking issues if you do over-squonk. Even though with squonking it does minimize this issue, you can still experience it. However, we’ll be recommending some atomizers that are great for squonking so you’ll have little to no issues.


Recommendations (Squonk Mods)

In this section, we’ll be going over some great options for the vaper looking to get into squonking. All of the recommended squonk mods and squonk atomizers are based upon performance, quality, and pricing. We will first recommend some squonk mods!


HCigar VT Inbox Squonk KitGuide to Squonking

  • Powered By Evolv DNA75 Board
  • Available as an entire kit
  • Maximum Wattage Output: 75w
  • Temperature Control (Ni200, Ti, SS)
  • Can be fully customized using EScribe Software

The HCigar Vt Inbox Squonk Kit is probably one of the more popular squonk mods on the market, and for good reason! For one, it’s powered by the Evolv DNA75 board, which ensures an accurate wattage output of 75w, and features temperature control for various wire materials including the most popular, Ni200, Ti and SS. What’s even better is that you can connect this device and use the EScribe software to further customize this mod!

The HCigar VT Inbox does require a single high drain 18650 battery for operation, and it’s very easy to access due to how this device is designed. In addition, taking the squonk bottle out is easy when it’s time for refilling, and it does hold about 7ml of e-liquid. The Inbox does feature an ergonomic and compact design, which makes it comfortable to use and easy to take it out on the road!

The included RDA is the HCigar Maze V1.1. It is a fairly compact RDA that features a velocity styled build deck and adjustable bottom and side airflow, giving you tons of airflow options. Due to it having bottom airflow and a short profile, be sure not to over-squonk with this one as you can experience leaking. Regardless, it’s a great flavor chasing RDA and an excellent match for the VT Inbox.

Purchase Here with Free Shipping!


Kanger Dripbox 2 80w TC Squonk KitGuide to Squonking

  • Maximum Wattage Output: 80w
  • Temperature Control (Ni200, Ti, SS)
  • Available as a full kit
  • 7ml Squonk Bottle
  • Requires a Single High Drain 18650 Battery

The Kanger Dripbox 2 80w TC Squonk Kit is another excellent choice for a vaper wanting to get into squonking. For one, it’s available as a full starter kit, so it basically includes everything you need to start squonking aside from an 18650 battery and e-juice. The Kanger Dripbox 2 does require a single high drain 18650 battery for operation, and has a maximum wattage output of 80w. It also features temperature control for Ni200, Ti and SS wires. The included squonk bottle can hold up to 7ml of e-liquid, so you won’t be filling too often.

The included RDA is the Subdrip 2 RDA. It does come with a pre-built kanthal build (0.2 ohm), but we do recommend building your own coils for better performance. It does feature fully adjustable airflow, and has an airflow option for MTL vaping, which is a nice touch. This RDA isn’t the best performing squonk RDA, but for someone wanting to give squonking a try, it’s a decent choice. However, we do recommend upgrading to something a bit better.

Overall, the Kanger Dripbox 2 80w TC Squonk Kit is a great starter kit for the vaper wanting to give squonking a shot. In addition, it’s a bit more affordable than the HCigar VT Inbox, which is great for the vaper not wanting to invest too much at first.

Purchase Here with Free Shipping!


Eleaf iStick Pico SqueezeGuide to Squonking

  • Maximum Wattage Output: 50w
  • Direct Output Voltage
  • Simple One Button Operation
  • Ultra Compact Design
  • 6.5ml Squonk Bottle

The Eleaf iStick Pico Squeeze is the most affordable squonk mod listed in our recommendations, and is also the most compact of the bunch. Like the previous two devices mentioned, this squonk mod does require a single high drain 18650 battery for operation. In addition, this box mod has a maximum wattage output of 50w, and features direct output voltage, which means the output wattage is determined by the resistance of your coil build. The minimum firing resistance is 0.15 ohm, but we find that with a resistance of around 0.2 ohm, you’ll be getting a satisfying vape experience.

The Eleaf iStick Pico Squeeze does feature a simple one button design, and has many safety features implemented, allowing a peace of mind during use. With its ultra compact form factor, it’s easy to carry with you on the go, and will fit in your pocket and purse with no issues whatsoever. The included squonk bottle does have an e-liquid capacity of 6.5ml, which is quite impressive considering how small this setup really is.

For the vaper wanting to get into squonking, and prefers simplicity, then the Eleaf iStick Pico Squeeze is an excellent choice. Be sure to check out our full review which goes more into detail of why we enjoy this squonk vape mod.

Purchase Here with Free Shipping!


Lost Vape DroneGuide to Squonking

  • Powered By Evolv DNA250 Board
  • Maximum Wattage Output: 167w
  • Requires 2 High Drain 18650 Batteries
  • Temperature Control (Ni200, Ti, SS)
  • 11ml Squonk Bottle

The Lost Vape Drone BF Squonk DNA167 Box Mod is another excellent choice for a vaper wanting to get into squonking, especially the vaper who wants more battery life and power. This device is powered by the Evolv DNA250 board, and it does require 2 high drain 18650 batteries. Since utilizing 2 batteries, this device does have a maximum wattage output of 167w, which will satisfy most vapers. A great feature of this box mod is that the squonk bottle holds a whopping 11ml of e-juice!

Since being powered by the Evolv DNA250 board, you can connect this device to your computer, and utilize the EScribe software to customize it. In addition, this board ensures an accurate vape experience. Do keep in mind since this device does require 2 batteries, and houses the Evolv DNA250 board, it is quite large which may be a drawback for some. However, if the additional battery life, power and squonk bottle capacity is something you’re after, then the size won’t bother you too much.

Overall, the Lost Vape Drone is a solid option for the vaper wanting a bit more power, capacity and battery life. If that’s something you’re looking for in a squonk mod, then the Lost Vape Drone is definitely one to consider.

Purchase Here!

Recommendations (RDAs)

In this section for recommendations, we’ll cover a few different atomizers that perform great for squonking. Unlike squonk mods, there are much more options when it comes to squonk RDA atomizers. Even though this is true, below are some of the best choices in our opinion when it comes to price, performance and quality.


Oumier Wasp Nano RDAGuide to Squonking

  • 22mm Diameter
  • Compact Design
  • Ultem Top Cap
  • Single Coil Build Deck
  • Includes Squonk 510 Pin & Standard 510 Pin

The Oumier Wasp Nano RDA is a single coil only atomizer, and sports a compact design, so it’ll look great on most squonk mods you attach it to. What’s great about this RDA is that the flavor you get from it is top notch, even though it’s a single coil only RDA. Due to how it’s designed, the coil sits right under your mouth while vaping, and the airflow can travel underneath your coil (with the right coil placement) which both add to the flavor you get from it.

Even with a compact form factor, it still has a relatively deep juice well, which is quite impressive. In addition, with a single coil RDA, you won’t be needing tons of power to get a satisfying vape experience, which means you’ll get pretty good battery life with a single battery squonk box mod. The airflow is fully adjustable, so you find the exact airflow to fit your vaping needs.

Overall, the Oumier Wasp Nano RDA is an excellent squonking atomizer, and the best of all, it’s incredibly affordable coming in at under $15.00! If interested in hearing more, check out our full review.

Purchase Here with Free Shipping!


Vandy Vape Pulse 22/24 BF RDAGuide to Squonking

  • Available in a 22mm and 24mm version
  • Designed for Squonking
  • Unique Tubular Airflow
  • Postless Build Deck
  • Various Color Options Available

The Vandy Vape Pulse 22 and 24 BF RDAs are one of the best squonk atomizers in our opinion and rightfully so as they were both designed with squonking in mind. These two RDAs are a collaboration between YouTuber The Vapor Trail Channel and Vandy Vape. Aside from it being designed for squonking, what makes it unique is it’s tubular top airflow, which is fully adjustable. This type of airflow provides excellent flavor since the air is able to travel underneath the coil and then up through the drip tip.

Another great feature of the Vandy Vape Pulse BF is that it is compatible with 810 drip tips and 510 drip tips with the included adapter, which means most of your favorite drip tips will fit! In addition, with its locking midsection, it ensures the airflow is always in the correct position and makes it even easier to adjust the airflow to your preference. The major difference between the two versions is that the Pulse 22 is single coil only and sports an overall diameter of 22mm while the Pulse 24 can accommodate both dual and single coil builds and has an overall diameter of 24mm.

If you’re looking to get into squonking and want a solid performing RDA for an excellent price, then you can’t go wrong with Vandy Vape Pulse BF RDA. Be sure to check out our full review for the Pulse 24 BF RDA where we go into more detail as to why it’s one of our favorites.

Purchase Here! (Pulse 24)Purchase Here! (Pulse 22)


CoilArt DPRO RDAGuide to Squonking

  • 24mm Base Diameter
  • Postless Gold Plated Build Deck
  • Compatible with 810 Drip Tips
  • Supports Single & Dual Coil Builds
  • Creative “Flavor” Airflow

The CoilArt DPRO RDA is one of the latest atomizers coming from CoilArt who’s well known for their Mage and Azeroth atomizers. This atomizer does include both a standard 510 pin and a BF 510 pin, so even if you didn’t want to squonk with it, you can use it on a traditional box mod. The DPRO RDA does feature a postless build deck, which is gold plated, ensuring excellent conductivity. With a postless build deck, it makes coil installs an absolute breeze. What’s even better is that it does support both single and dual coil builds!

This RDA also features a create “flavor” airflow, which is slightly angled so the air will travel underneath your coils. In addition, it is fully adjustable which is great. It is 24mm in diameter, so it’ll look great on most mods you attach it to, and its height is only 36mm, so it does carry a fairly compact form factor.

Overall, the CoilArt DPRO RDA is another great option for those looking for a squonking RDA. It’s available in stainless steel, black and full Ultem. If you’re looking for a squonking atomizer that’s 24mm in diameter and has a few unique features such as the creative flavor airflow, then the DPRO is one to consider.

Purchase Here with Free Shipping!


Advken Gorge RDAGuide to Squonking

  • 24mm Base Diameter
  • Supports Single Coil Builds Only
  • Fully Adjustable Airflow
  • Includes Stainless Steel & Ultem Top Cap
  • Compatible with 810 Drip Tips

The Advken Gorge RDA is another 24mm atomizer that includes both a squonk/BF and standard 510 pin. However, it differs by being a single coil only RDA and features a similar build deck to the Oumier Wasp Nano. With this style build deck, it makes coil installs easy and quick. In addition, it is compatible with 810 drip tips and does include an Ultem wide bore 810 drip tip.

What’s great about the Advken Gorge is that it includes both an Ultem and stainless steel top cap, so if you don’t like Ultem, you can always use the stainless steel variant! It’s always a pro when an atomizer comes with a lot of extras, and this is a prime example of one. The overall design is fairly similar to the Oumier Wasp Nano, but there are some key differences such as the diameter and size as this RDA is a bit taller in comparison. If you’re a fan of the Wasp Nano, then you’ll definitely like the Gorge.

All in all, the Advken Gorge RDA is yet another solid option for those looking for a good squonking RDA atomizer. If you’re looking for a single coil only RDA that’s 24mm in diameter, then look no further!

Purchase Here with Free Shipping!


528 Customs Goon V1.5 RDAGuide to Squonking

  • 24mm Base Diameter
  • Clamp Style Build Deck
  • 7mm Deep Juice Well
  • 10mm Wide Bore Delrin 810 Drip Tip
  • Adjustable Side Airflow

The original Goon RDA by 528 Customs is one of the most popular atomizers on the market, and for good reason! It also made our Top RDA article as it was and still is one of our favorites. Now, 528 customs has released a followup to the original, the Goon V1.5, and it does include a squonk 510 pin, which was something many vapers wanted from the original. This atomizer does feature a two post clamp style build deck which was designed to easily secure larger leads. In addition, the inside diameter of the build deck is 20mm, so you can fit almost any coil build you desire.

The Goon V1.5 RDA does feature adjustable side airflow, and it does support single coils since you can just have only 1 airflow slot open. With its 7mm deep juice well, you can fit a good amount of cotton and it’ll fit a ton of e-juice. Not to mention, it does include a 10mm wide bore delrin 810 drip tip, which is perfect for you cloud chasers! What’s even better, this RDA is available in a ton of color options including Black, Stainless Steel, Gold and Rose Gold.

Overall, the 528 Customs Goon V1.5 RDA is an excellent successor to the original Goon RDA. If you’re a cloud chaser and looking to get into squonking, then this is the perfect choice!

Purchase Here with Free Shipping!


Wotofo Vaporous RDAGuide to Squonking

  • 24mm Base Diameter
  • Unique Build Deck
  • 2 Different Airflow Configurations
  • Wide Bore Ultem Drip Tip
  • Includes 810 Drip Tip Adapter

The Wotofo Vaporous is one of the newest RDAs coming from Wotofo, who’s well known for their excellent quality and affordably priced atomizers. Like many of the other atomizers recommended, this RDA does have an overall base diameter of 24mm. What makes the Wotofo Vaporous unique is its build deck which implements a staggered two post deck and clamp style deck into one. At the top of the deck itself is where you’ll find the clamps, and underneath is where you’ll see the staggered terminals. This makes for easy and quick coil installs.

Another feature which makes this RDA unique is that it has two different airflow options, one is 8mm by 2mm and the other is 8mm by 3mm. Either airflow option is fully adjustable, so you can find your desired draw. The Wotofo Vaporous RDA also includes a wide bore Ultem drip tip, which is proprietary, but does include an 810 drip tip adapter, so you can use all of your favorite goon styled drip tips.

All in all, the Wotofo Vaporous RDA is a great performing RDA that includes both a squonk 510 pin and a standard 510 pin. If you’re looking for an affordable and unique RDA, then the Wotofo Vaporous is definitely worth considering.

Purchase Here with Free Shipping!


Augvape Druga RDAGuide to Squonking

  • 24mm Base Diameter
  • Two Post Build Deck with Clamp Snag System
  • Adjustable Dual Airflow Slots
  • 6mm Deep Juice Well
  • Compatible with 810 Drip Tips

The Augvape Druga RDA is another atomizer that made it to our Top RDA Article, and is quite popular since it is quite affordable and offers excellent performance. It does sport an overall base diameter of 24mm, and features a unique two post build deck with a Clamp Snag System, which allows you to easily secure your coils. In addition, the build deck diameter is 20mm, which means you can install some pretty big builds with little to no issues.

The Augvape Druga does have a 6mm deep juice well allowing to fit a good amount of cotton. In addition, this atomizer does feature a rounded internal top cap, so you’ll be getting excellent flavor. The side airflow is fully adjustable, and matched with its top cap design ensures smooth airflow delivery. The Druga is available in a ton of different colors as well such as Rainbow, Stainless Steel, Black, Red, Blue, Purple, Green and more.

All in all, the Augvape Druga RDA caters to both cloud chasers and flavor chases with its rounded internal top cap and tons of available airflow. If you’re looking for a simple yet good all around RDA, then the Augvape Druga is for you.

Purchase Here with Free Shipping!


In conclusion, we do hope this article helps you in starting your journey into squonking. While squonking may not be for everyone, we do think it’ll fit a lot of vapers’ needs. You won’t really know if it’s for you until you give it a try!

Squonking itself is quite simple, but there are certain aspects that are much more in depth which determines which is a good squonk mod or atomizer and which is not. The squonk mods recommended all perform great, are affordable, and best of all widely available. As mentioned previously, there aren’t a ton of options on the market for squonking, especially mass produced mods, but with it becoming more mainstream, we’re sure we’ll be seeing a lot more devices be released.

The recommended atomizers all perform great whether you’re squonking with them or not. However, we find that for squonking specifically, these are all excellent options when it comes to pricing, performance, quality and availability. Thankfully, there’s a lot of options when it comes to choosing a squonk RDA, and even though these are some we recommend, you might find some that are more suited for you.

Regardless, we do hope this article helps you when it comes to squonking and gives you a better understanding of what it is and what’s available. Feel free to let us know if you squonk or not, if it’s something you’re interested in or if you prefer something else! Remember, with vaping there’s no right or wrong way, do what suits you the best and fulfills your needs! Thanks for reading!

I am a vape hobbyist currently living in the central Florida area. I have been vaping for over two years now, and constantly keep up to date with the newest vape gear. I recently started working in the vape industry, and my goal is to inform as many people as I can of the benefits of vaping, and how to go about getting the best deals possible.



Subscribe to our Newsletter where you can save up to 50% off on vape products!