Fatbaby V1.5 100 Watt Box Mod – $94.99 USA
Fatbaby 100w Mod
100w Box Mod
The new Fatbaby V1.5 100 watt box mod by Project Sub-Ohm will be available online at midnight on December 3rd for only $94.99 when you use coupon “VC5” at checkout.
I believe that Project Sub-Ohm created a custom version of the Sigelei 100 watt bod mod and named it the “Fatbaby”. It has a upgraded YiHi SX330 chip-set which is capable of firing atomizers as low as 0.15ohms. The device is variable wattage from 10w – 100w in 0.1 watt increments and requires two IMR 18650 30 AMp plus batteries for power.
On the side of the box mod you will find a bright OLED screen that will display everything from battery power level, output wattage, output voltage, and atomizer resistance. The back plate is held in place with screws and magnets, you can use the screws to hold it on tight or just let the magnets keep it in place to easily swap out batteries.
The Fatbbaby box mod is made from lightweight aluminum and the front is engraved with the Project Sub-Ohm and Fatbaby logo as well as a serial number in Roman Numerals. This is a very cool and powerful device with a reasonable, I’m sure they will sell out quick.
The V1.5 has an upgraded adjustable copper 510 center pin and the battery door is fully magnetic, no screws!
Coupon Code: VC5
Fatbaby 100w Features:
- Beauty screen and greeted with “fatbaby”â¢ when turned on
- Full Aluminum Body For rigidity!
- Capable of firing 0.2 ohm – 3.0 ohm build
- Capable of putting out 100 Watts of power!
- Beautifully Engraved With Project Sub-Ohmâ¢ Logo and “fatbaby”â¢ logo
- Serialized (Roman Numeral Serialization, I, II, III and so on)
- Roman Numeral Serialization is an extremely labor intensive work, each number is manually adjustable with live people!
- Matches all other Project Sub-Ohmâ¢ products
- We Made It Powerful! We Made it Affordable!
- Unique and Elegant “fatbaby”â¢ gift box packaging. (Highly Sought After!)
- Output Power: 10W – 100W
- Output Voltage: 1.5V – 7.0V
- Loading Resistance: 0.15 ohm – 3.0 ohm
- Output Short Circuit Protection
- Reverse Battery Protection
- 1 x “fatbaby”â¢ Mod by Project Sub-Ohmâ¢
- 1 x screwdriver
- 4 x copper center pins
- 4 x stainless steel screws for back battery door
- 1 x instruction manuel
- 1 x signature “fatbaby” Mod gift box with Project Sub-Ohmâ¢ and ‘fatbaby”â¢ logo